The bubbles in the bubbles where you got reminded of the structures on a OHMA plate left soft marks on the foil (I think). Maybe they are better visible when the foil is dry and you look with polarization.
The “outie” and “innie” pairs are perfectly seen in that image. Wonderful. One can only wonder how the cavitation can cause such repeatable morphology in the foil.
On a side note, Bob, you have produced several hours of deeply interesting content in the past few days, all of it deeply interesting, and it’s getting increasingly hard to catch up with all of it but by all means please continue this streak, I hope to be able to keep the pace!!! You are on a roll!!! Congratulations.
I wonder if these phenomena are a simple hydrodynamic analogy of EVOs or they are actual EVOs. Water is a polar liquid and it is normally partly dissociated in OH- and H+ ions, moreover ultrasounds remove the oxide layer from the Al foil and let the metal react with water producing "native" H+ ions. Where ultrasond field is stronger, also the production of H+ is stronger. So in these points there are a lot of charged particles with very high kinetc energy (and in general high energy density): a good environment for generating EVOs. There are a couple of experiments that can be done to verify this hypothesis: 1) setting up a magnetic or electric field accross the observed zone and noticing if there is a drift of these structures; 2) using a non polar solvent instead of water (an organic solvent or even a very thin oil, possibly silicone based) to see if the structure formation is somewhat inhinibited. Also using a less reactive metal may reveal something interesting.
Love the videos, Bob - I look forward to them every day! Can you confirm my understanding that an innie/outie pair is the cross sectional impression left by a spinning torus half in front of the foil and half behind it?
Maybe someone who has his hands on one of these ultrasonic cleaners could try and add some aluminum powder to the water so that there is a high enough density of these to hopefully show some kind of magnetic or even liquid flow lines as the particles are entrained in the vortices?
Evening Bob, I did "light" research on Soviet torsion fields and it appears to be considered as pseudoscience. Why is that? Are evos natural occurring torsion fields? Has there ever been a ball of lightning that appeared as a torus/spinor? And lastly would Podklenov's impulse gravity generator be some form of torsion field generator?
Morning Bob, So I’ve been reading on waves and Warp drives/ Jump drives and I came to to a conclusion that they’re some sort of Spatial Doppler Shift. Here me out. When an object breaks sound barrier it’s compressed the air in front of it and creates shockwaves behind it (rarefaction) A warp drive does the same but not by traveling but bending space it self in the shape of a shifting wave that travel the speed of light. So my question ,assuming that I’m right about what I just said, when an evo/neutrino/tachyon travels would it appear like a black hole/black evo (gravitational compression in Doppler effect) approach in the observer releasing Unruh radiation and appear to like a white one (gravitational rarefaction )when leaving the observer releasing Cherenkov radiation?
The bubbles in the bubbles where you got reminded of the structures on a OHMA plate left soft marks on the foil (I think). Maybe they are better visible when the foil is dry and you look with polarization.
The “outie” and “innie” pairs are perfectly seen in that image. Wonderful. One can only wonder how the cavitation can cause such repeatable morphology in the foil.
On a side note, Bob, you have produced several hours of deeply interesting content in the past few days, all of it deeply interesting, and it’s getting increasingly hard to catch up with all of it but by all means please continue this streak, I hope to be able to keep the pace!!! You are on a roll!!! Congratulations.
I wonder if these phenomena are a simple hydrodynamic analogy of EVOs or they are actual EVOs. Water is a polar liquid and it is normally partly dissociated in OH- and H+ ions, moreover ultrasounds remove the oxide layer from the Al foil and let the metal react with water producing "native" H+ ions. Where ultrasond field is stronger, also the production of H+ is stronger. So in these points there are a lot of charged particles with very high kinetc energy (and in general high energy density): a good environment for generating EVOs. There are a couple of experiments that can be done to verify this hypothesis: 1) setting up a magnetic or electric field accross the observed zone and noticing if there is a drift of these structures; 2) using a non polar solvent instead of water (an organic solvent or even a very thin oil, possibly silicone based) to see if the structure formation is somewhat inhinibited. Also using a less reactive metal may reveal something interesting.
Thanks for the very nice presentation yesterday and live open science experience, so much possibilities with this! Watched the last part of it this morning as it got a bit late for me. A synchronicity this morning: someone posted that p25 of the CIA's Gateway Report is now available from the archives of the Monroe Institute (https://assets.documentcloud.org/documents/20601195/6-full-report.pdf and https://www.vice.com/en/article/v7e4g3/found-page-25-of-the-cias-gateway-report-on-astral-projection) on p25 "Finally, our description of the universal hologram, the Torus of creation and evolution is neither new nor original" Also, on page 18 some very nice torus renditions. For some general thoughts about torsion and shapes I can recommend the book Shape Power (https://www.goodreads.com/book/show/2372265.Shape_Power?from_search=true&from_srp=true&qid=bXo8N2I4YV&rank=5) In the book they also talk about Keely's experiments with ultrasonic frequencies (42800Hz) and aetheralization of water. The book can be found on http://libgen.is (as it's out of print).
Love the videos, Bob - I look forward to them every day! Can you confirm my understanding that an innie/outie pair is the cross sectional impression left by a spinning torus half in front of the foil and half behind it?
Maybe someone who has his hands on one of these ultrasonic cleaners could try and add some aluminum powder to the water so that there is a high enough density of these to hopefully show some kind of magnetic or even liquid flow lines as the particles are entrained in the vortices?
Is this just a coincidence?
https://youtu.be/D7sfAq0cniU?t=3583
Evening Bob, I did "light" research on Soviet torsion fields and it appears to be considered as pseudoscience. Why is that? Are evos natural occurring torsion fields? Has there ever been a ball of lightning that appeared as a torus/spinor? And lastly would Podklenov's impulse gravity generator be some form of torsion field generator?
Morning Bob, So I’ve been reading on waves and Warp drives/ Jump drives and I came to to a conclusion that they’re some sort of Spatial Doppler Shift. Here me out. When an object breaks sound barrier it’s compressed the air in front of it and creates shockwaves behind it (rarefaction) A warp drive does the same but not by traveling but bending space it self in the shape of a shifting wave that travel the speed of light. So my question ,assuming that I’m right about what I just said, when an evo/neutrino/tachyon travels would it appear like a black hole/black evo (gravitational compression in Doppler effect) approach in the observer releasing Unruh radiation and appear to like a white one (gravitational rarefaction )when leaving the observer releasing Cherenkov radiation?