We already looked using Macro videography at the Outside of the inside, HERE and found similar structures to those observed in Dr. Takaaki Matsumotos work. The findings indicated that there was the point of “electro-nuclear collapse” going on and that the marks were similar in form to that one might observe in a steady state Tesla inspired plasma ball. I had been to the Technology museum in Brno a week before we took those macro videos, so was familiar with the patterns.
I had first mentioned that EVOs were related to Tesla’s work in my 24 April 2017 presentation to the Dutch engineering society in Copenhagen, called “The New Fire and other Matter Manipulation” where I showed a photo of Ken Shoulders’ EVO driven discharges alongside a single Tesla type discharge and a quote from a section from Stoyan Sarg’s book
“The Heterodyne Resonance Mechanism (HRM) effect is easily triggered by scalar waves generated by a Tesla coil. Fig. 2.16. shows an optical signature of a supercluster in a plasma globe. The plasma globe was invented and demonstrated for the first time by Nikola Tesla in 1904.”
Now we know that in an EVO, it can be charge-less as well as have its Fractal Toroidal Moments self-cancel to create a non-electromagnetic radiating boundary, similar to an anapole, resulting in it becoming an ideal monopole oscillator. The structures can both be interacted with via, as well as emit, scalar waves. Hence, depending on their state, they may not interact with electric or magnetic fields, but always interact with each other - communicating and clustering in a variety of ways.
They appear to have an azimuth, (I hypothesise a coherent gravitational wave beam of spinning dark matter, likely relic neutrinos) through which they can link up into filaments and larger self-similar rings. Matter can be caught in this beam. When in rings they can then further cluster into rings of rings. In this way we move from micro-ball lightning to larger self contained long lived luminous objects including filamentous ones with potentially a point of electro-nuclear collapse on one end and a point of electro nuclear re-generation on the other. At least it would appear that matter can be transported down the filament and re-emerge at the other end, though not it would appear in its original state, be that spacial elemental arrangement, elements or even energy form. In the image below, again from my 2017 lecture, you can see regular arrays of material arranged on the inside of the outside of a Dr. Alexander Parkhomov reactor as well as the production of thin long crystals, not present in the starting materials.
You can see these same filaments focussing on the neck edge of a fused quartz resonator in a NOVA experiment here in this slow motion video we published on 25th Oct 2017.
I hypothesise that these filaments, even if invisible are linking from the outside of the inside sphere (Yin / Electro-Nuclear Collapse end) of the TSG to the inside of the outside (Yang / Electro-Nuclear Regeneration end).
Stoyan Sarg explained these as clustering into a filament, but also radially, which we have caught on video on VEGA experiments, leading to hexagonal structures that may explain the forms seen in Parkhomov’s reactor above and the inside of the outside of the TSG.
“Fig. 2.10: Twisted supercluster formed of clusters. These superclusters excite the surrounding gas molecules or ions and they emit light in the visible spectral range.”
The Outside of the inside of the 8 year old TSG run for 100s of hours
The following optical microscopy videos were taken with a Samsung S7 and a Narugo lens capable of up to 400x magnification before cutting of samples of the inner sphere were made.
In the first video, You can see some geometric black spots with crystals arranged around them, some fibrous structures, Some strange crystals which appear to be translucent.
In the second video, we may be seeing EVO charge accumulation and launching points and areas “cleaned off” with crystals at the centre.
This could be similar to those defined by Ken Shoulders and indicated in Henk Jurrien’s VEGA experiment. Note in both cases below, we are looking at the cathode.
We know that charge separation and turbulence is critical for formation of charge clusters - perhaps resonant sound modes so critical to ULTR experiments coupled with ion-acoustic waves, so critical to NOVA and VEGA experiments are playing a major role in the self organisation here. See the ‘sprites’ in the ULTR experiment below.
In the third video, we see a few potential Yin-Yang vortex solitons structures.
This is reminiscent of a potential magneto-hydrodynamic structure found in the initial SEM/EDS session, looking at a particle scraped from another TSG in a different part of the UK.
With this all in mind, the evidence on the outside of the inside appears to support the notion that material is predominantly being stripped from this surface into largely Yin ended structures and fed to to the inside of the outside. You will see in the session below many spheres, but they are largely made of stripped steel and not so often embedded in or covered with large deposits of carbon and other elements.
There is a lot of fragments of steel from the cutting process and also possibly from the dremmel cutting disk which may explain some of the glass fibres, however, there were clearly fibres on the sample before the cutting had taken place (see above). TBD
SEM/EDS data and images will be added to this blog in due course as it was and will be some more to the Outside Inside blog.
Truly awesome information great work opens up lots of information and old technogy as well your a true pioneer Ken shoulders would have loved this
Thanks bob I loved every video it shows so much information vey inspirational wow !
“coherent gravitational wave beam of spinning dark matter, likely relic neutrinos”
A circular resonant Aether “current”. As the dramatic picture from Ken Shoulders shows, aether waves are scalar - and quite spectacular. The colours also match what Tesla described (from pearlescent white through violet/blue to other colours as well, and all quite “soft” in their appearance, unlike jagged electrical spark glows).
An excellent paper! It makes sense that the filaments flowing from the inner surface of the outer sphere to the outer surface of the inner sphere are aether currents - the worm hole from the consuming fractal toroid on the outer surface of the inner sphere to the erupting fractal toroid on the inner surface of the outer sphere. Likely the curved geometry of the concentric spheres plays a significant role in allowing the aether columns to form between the surfaces rather than the curved flux loops seen in the ULTR experiment where just one flat-ish metal surface was present. Aether streams (as (focussed) scalar waves), Tesla observed, generate electron avalanches when striking a metal plate, useful when regenerating atoms from aether streams formed from ElectroNuclear collapse (so bringing together Dr. Matsumoto’s work with that of Ken Shoulders and Nikola Tesla). This points the way to using the TSG in an HHO generating ultrasonic/water system or VEGA anode (interior sphere)/cathode (exterior sphere) system. As the TSG is relatively easy to construct, adding an ultrasonic water pump circulatory system (bearing in mind safety concerns) and/or electrically separated charged anode/cathode system (with hydrogen feed round the inner sphere) should be relatively inexpensive and “straightforward” to do (no special lab required)
Anyway, brilliant as ever Bob 🙂👍 and built on solid foundations.
…Two Steps From Hell - Tristan music now plays 🙂… (for some reason I keep seeing in my minds eye a control panel with changing green counters in front of me as a mighty ship of incredible power at my command passes over the planet below , but, hey, that’s just me)