The bagels I made are definitely at "the limit of tight winding, when helicity of the coil vanishes", especially the smaller ones, so that's good. And looks like a 5-tor would be worth trying. What a find, that paper! I'm just wrestling with the vacuum on the new setup, will be running tests in the next day or so.
Great - well Dave Boutilier has some really interesting approaches he is exploring so I want to do a mega thread to combine the developments.
I am embarrassed that I did not find that paper sooner - however, it is quite special that I found it as a result of trying to learn more about multipole resonances attributed to the GP.
It uncovered a lot of good studies. I found this from a related search, the way they are making a toroidal dipole moment with this metamaterial is interesting: www.nature.com/articles/srep02967.pdf. I wonder if it could be modified to make a 2 or 3 tor.
As I was rewatching this and working on an off the shelf design for converting my grill to Windhexe, my daughter called and asked me to put a bagel in the air fryer for her. I'm taking it as a sign we are on the right track ;-)
Ok. That same grill I mentioned up thread about conversion to windhex occasionally spits out chunks of white rocky substance. Sounds crazy and doesn’t always happen it does. I haven’t tested it but suspect it’s calcium oxide or carbonate.
Here’s my take on what’s going on-
It’s egg shaped which definitely matters.
There’s a steel grate over the removable bottom (sharper end of egg) and then the grill near the widest part of the egg.
It occurred to me that in many ways this is was like a giant open tube (Bob would call it a valve).
It seems possible to get some thermionic emission from the grates under the right conditions then you get the airflow up and through and presumably moving and thus charge motion.
I grill a lot out there and stare at the coals and consider that at a certain low level the LENR or coherent matter reactions are responsible for all combustion and chemistry but that’s another post. Anyway I’ve pulled this stuff out occasionally but repeatedly and KNOW it wasn’t in there before.
I’d bet nature is doing its thing because I’m giving it the right environment and conditions. And yes, there’s a definite woo component. I can almost commune with the coals. I’ve had similar feelings when I got the cooling water on my glowing (I think I described in another comment).
But yea. Alchemy is real. And if you do stuff and pay attention it can come to you.
I hope to get to CC to discuss over coffee or drinks. Cheers, Alex.
Hi Bob. Ten years ago I was visiting Selinunte archeological area (Sicily). While I was strolling around I photographed a little symbol, partially hidden in the middle of other rocks, left without any description or comment for visitors. You can see it here https://www.instagram.com/p/CqneU4VteWH/?utm_source=ig_web_copy_link, Well, after what you've showed till now, it makes me think. Selinunte is a Greek colony dating about IV century BC.
I found this article on toroidal multipoles very helpful to understanding the contributions of Zeldovich and Dubovik to traditional Maxwellian EM dynamics. As you mentioned in the broadcast Bob, there are many technological possibilities but these are just talking about info tech. The figures are really good, like figure 4, and section 5 explains the idea of anapoles. https://www.degruyter.com/document/doi/10.1515/nanoph-2017-0017/html
Thanks Simeon, I have skimmed it so far and can say that this is a nice launch point to read many of the materials we have been discussing these past years.
Although it is again, as you say, focussed on info-tech applications, I like figure 1(A) as it is the first one that I have seen that clearly shows poloidal currents excited at the surface of a sphere.
this is inline with our physical, macro observations.
"A promising toroidal element in solid state systems is the skyrmion. It is the smallest possible perturbation to a uniform magnet, displaying as a localized solitonic magnetic whirls (spins) usually with a width of a few tens of atoms"
As you say, it succinctly connects the Toroidal moment and the Anapole, I have shown this diagram before (8(B)), but it is something that is critical to understanding how these systems can make a 'Macro Atom' / 'Macro Quantum Object".
And, how the Great Pyramid can present as one.
As I said at Assisi last year, the Anapole description is the same as an EVO.
Thanks for the links, I've watched these videos several times before but it's all "clicking" now that I have a visual image in my mind of the anapole and what it does. So when the authors here talk about "metamolecules" or "macro atoms" as you mention above, is these reasonable descriptions of micro-ball lightning or EVOs? It's certainly easy to visualize that way.
Also, the Talebi et al. article seems to be making very similar points as the Lockheed Martin patent.
I have a question - for the main torus, are the two sub-toruses the only two, or are there more? The reason I ask is that I can see in ULTR, for example, that the two toruses form at the air/aluminium interface, but no such (obvious) interface exists in the pyramid, so why are there just two sub toruses? Is this due to the alignment of the pyramid (N-S) together with where EVOs are “fed into” the larger torus - or, is there an actual material interface in the stonework at the two places shown? Also, could sound (frequency) play a role in the sighting of the two subtoruses? Where there is a discontinuity, I get why they would form, but not in otherwise undifferentiated stonework.
It may be more. In ULTR we see two (Yin Yang) on n and at least 2 on n-1 when there is 'bar spiral galaxy' structure formed. This may be because of surface.
In the Pyramid I believe only the Two on the n-1 'Breaker side is needed' as the n dissociation leads to hydrogen and then the full ionisation of H2 leads to EVOs/Aetheric matter and that is sent trough the other side that then start a torsion mirror vortex on the 'S' side, which, in the Tungsten Chop shop is what STARTS (IMHO) the second Ball Lightning to form that causes the chop.
Thanks Bob - what I am really wondering about is how "the two" "know" to appear so as to cross both the galleries (I believe your observation that there are two) and the kings chamber - if they were 90 degrees further round, they would miss both.
Now, I am thinking this could be because the first appears where it does (between the galleries) precisely because of the Hydrogen that makes the EVOs and Aetheric matter (that is, matter on a finer scale in the fractal universe than nucleons) being introduced there. That is the "black hole" torus.
It appears that the black hole leads to the creation of a "white hole" 180 degrees round the major (virtual) torus formed by the moment eminating from the black hole (moments like to produce both an encompasing larger "field" torus around the torus that spawns them - and a further reaching column that also arcs around - resembling an apple with a stalk (the bagel, in other words, creates a ghostly apple or mandarin-like shroud around itself with a stalk surrounding what I believe is the worm hole - nature likes to make use of a good pattern!). This worm hole, however, doesn't like to "go straight" but likewise likes to arc to a point, 180 degree around, where, in the right conditions (like a discontinuity, perhaps), it opens out to form the white hole - which likewise forms a ghostly apple and stalk, only this time with the stalk being empty (the stalk actually being induced by the stalk from the black hole. And the result, thanks to geometry, is that the white hole stalk goes on to complete the circle back into the black hole.
Of course, where the white hole does not appear, the black hole stalk simply circles round back to the black hole, which could well lead to a runaway effect that quickly sees the black hole consume itself.
At least, that is how I imagine the large torus being induced by the smaller torus. Equally, with enough toruses, you should get black hole/white hole/black hole/white hole.... creating a virtuous circle that dampens down any runaway effect (with an even number of segments). Take this to two tier, and the smallest tier works as above, while the larger tier sees an increase in flux flow (through the joined up "stalks" / worm holes) that strengthens its own stalk (worm hole), apparently more exponentially than linearly. Take that to a third tier and the (partly?) exponential increase in flux flow through the worm hole eminating from the third tier torus and the whole becomes capable of "eating" and cohering large numbers of nucleons through the third tier worm hole (stalk).
At least, that is how I see things working - with the natural tendency of these worm holes to curve round a virtual axis (the Christ Centre) kicking the whole thing off from one torus, with discontinuities or some other mechanism - perhaps worm hole kinks? (given what we have seen to date, these worm holes are likely spiral in form) . Having said all that, it would appear that the first torus can be induced by a swirling vortex / vorticle of sufficient force, either at as a continuation of the vortex/vorticle at its centre or at 90 degrees to it.
So, given all this, with the first torus created, a (spiralling) worm hole (stalk) that loops back on the torus it eminated from is created, with, it looks like, a white hole appearing 180 degrees round, then every 90 degrees (when it forms black-white-black-white and loop), then every 45 and so on. If this is the case, only one point is needed to create the initial torus, with the radius of the resulting loop-back "worm hole" being dependent on the strength of the torus and the external pressure on the volume (so, relax external pressure, the worm hole radius increases, increase the pressure and the radius increases), the external pressure in this case being provided by both the electric and magnetic forces acting on the underlying aether ... which strongly suggests the existence of the aether (as deeper iterations of the fractal universe) rather than the rubber sheet of spacetime (yuck!)
As to how to increase from 2 to 4 to 6 to 8 segments (and so on), this is likely achieved by crossing vortices (as in the work of Winston Bostick)
This is in line my understanding however, in part I think EM/Cardinal points and/or sound waves in the GP, due to its pyramid structure, help set up the resonant positions for 'O' - that is to say, there is already an Aether vortex there. We can see that EM waves interact with the pyramid in a distinct way from the Russian paper and I have every reason to expect sound would too.
Further, and in line with your musings, I think the lower breaker on the N side is doing most of the work and the product of that is fed into the resonant positions where Aetheric matter can aggregate.
I also think that Hydrogen can reach the upper gallery most likely through the rocks - I believe there would have been/is still the granite there.
So what is sent to the pure Aether vortex (possibly torsion field) side is more Aether increasing its density and possibly screened matter in EVOs.
I have not done the plan view, but will. It is offset. The centre line of the Great Gallery and the newly found gallery above is 7m to the East. The opposite Aether vortex is likely to the west and is constant with the location of the 'Kings' chamber. This is also in line with the offset nature in ionic freeze, section of YY in ULTR and Teslas Flower pot. There is an offset in the n-2 tor of an auspicious symbol when views from the top. The arrangement for two is like my cover slide for "Seek<&>Share" here with the ancient "sun worshipping symbols"
Just had one more thought - the e-m "stalk" creating the larger torus, when the larger torus forms, likely then induces a counter torus to form a two-way braided flow pair -either that, or two stalks form in opposite directions, so the apple has two stalks, top and bottom.
Initially full rotating around each other every 180 degrees, as their energy increases, the number of twists increases, as they rotate around each other every 180 degrees, then every 90 degrees, then every 45 degrees, and so on, like an elastic band being wound - and that is how and why the toruses organize as they do - at the crossover points in the braid of counter-circling (e-m) filaments.
If this is the case, this explains how a torus can increase in energy without increasing in size (for, it is the number of twists that increase with, it would appear, a practical limit of somewhere around 52).
Now, I seem to remember, 52 is encoded somewhere in some measurement in the great pyramid, meaning the angle between each torus round the greater torus is somewhere around 2.25 x pi.
52 is also somewhat similar to the face angles of 51 degrees 50 minutes 40 seconds and, as you can't have 51.8444 toruses (fixed typo!), 50 or 52 are the closest values (assuming odd numbers just don't occur).
Also, (10 x pi / golden ratio) is approximately 50.83204 - divide 360 by (10 x pi / golden ratio) and you get 2.25 x pi as the inner angle for each arc - moving beyond that seems not to be possible, at least not in nature.
So, did the builder of the Great Pyramid know "a thing or two"? You bet!
As mentioned in the chat here is the link to the folder with the O structure uploaded in multiple filetypes, 3D and 2D. Autocad, Illustrator, SVG, STP, OBJ, Sketchup even lightwave (v6)
If you need a more exotic filetype you can always download the 3DM (Rhino) file and export to any filetype you want from Rhino 3D. https://www.rhino3d.com/download/ free trial for 3 months. I'm not affiliated with mc neel and Rhino 3D, but it's a very handy piece of software with huge capabilities ;)
Having established that the dimensions of the Great Pyramid on the Giza plateau were needed for science, not just for a tall royal vanity object, we must consider what applied science needed the Great Pyramid to be 8-sided rather than 4-sided, while the neighboring two were happily 4-sided.
We must not forget the other pyramids of various sizes and shapes up and down the ancient Nile river bed for dozens of miles.
The bent pyramid was likely precisely bent for science.
All the pyramids, big and smaller, have elaborate precisely constructed underground structures.
One pyramid appears to have been violently exploded above ground level, exposing huge underground chambers, mostly intact.
Many of these Nile pyramids have obviously been meticulously repaired and refurbished. For vain-glorious beauty's sake, or still, always, for science sake?
Bob, as you rightly insisted, we shouldn't whimsically change terminology invented by pioneers of science, and which are already widely used for convenience of reference, and to honor the discoverer.
However, I suggest that Ken Shoulder's original term EV, Electrum Validum, meaning Strong Electron, is more apt than his less happily coined EVOs, Exotic Vacuum Objects.
These dynamic fractal objects pervade the universe on all scales, they drive many, and interact with all, natural physical processes: there is nothing properly "exotic" about them.
Let's say he got it more right the first time, when he called the phenomenon EV, Electrum Validum.
Just plain BL, Ball Lightning, is beautifully evocative too, for objects that are not exotic, and not found only in a vacuum.
Here is another article from 2012 about "Rayleigh-Taylor Instability" and kinks that I think explains partly why strange radiation will start rotating because of the fluid dynamics:
"Among the recent discoveries are that solar corona loops do not appear to be a single structure, but rather are composed of fractally braided strands akin to a large rope."
...
"The loop develops a kink—a corkscrew-shaped instability—and individual strands start to break. "
...
What fun they have, maybe they should watch you videos instead :-)
The bagels I made are definitely at "the limit of tight winding, when helicity of the coil vanishes", especially the smaller ones, so that's good. And looks like a 5-tor would be worth trying. What a find, that paper! I'm just wrestling with the vacuum on the new setup, will be running tests in the next day or so.
Great - well Dave Boutilier has some really interesting approaches he is exploring so I want to do a mega thread to combine the developments.
I am embarrassed that I did not find that paper sooner - however, it is quite special that I found it as a result of trying to learn more about multipole resonances attributed to the GP.
It uncovered a lot of good studies. I found this from a related search, the way they are making a toroidal dipole moment with this metamaterial is interesting: www.nature.com/articles/srep02967.pdf. I wonder if it could be modified to make a 2 or 3 tor.
I saw the images from of the punched metal before but not the whole paper - thanks.
As I was rewatching this and working on an off the shelf design for converting my grill to Windhexe, my daughter called and asked me to put a bagel in the air fryer for her. I'm taking it as a sign we are on the right track ;-)
oh yes. I was standing at a tram stop and the building opposite is replete with features I am off to photo the origins for this weekend.
Ok. That same grill I mentioned up thread about conversion to windhex occasionally spits out chunks of white rocky substance. Sounds crazy and doesn’t always happen it does. I haven’t tested it but suspect it’s calcium oxide or carbonate.
Here’s my take on what’s going on-
It’s egg shaped which definitely matters.
There’s a steel grate over the removable bottom (sharper end of egg) and then the grill near the widest part of the egg.
It occurred to me that in many ways this is was like a giant open tube (Bob would call it a valve).
It seems possible to get some thermionic emission from the grates under the right conditions then you get the airflow up and through and presumably moving and thus charge motion.
I grill a lot out there and stare at the coals and consider that at a certain low level the LENR or coherent matter reactions are responsible for all combustion and chemistry but that’s another post. Anyway I’ve pulled this stuff out occasionally but repeatedly and KNOW it wasn’t in there before.
I’d bet nature is doing its thing because I’m giving it the right environment and conditions. And yes, there’s a definite woo component. I can almost commune with the coals. I’ve had similar feelings when I got the cooling water on my glowing (I think I described in another comment).
But yea. Alchemy is real. And if you do stuff and pay attention it can come to you.
I hope to get to CC to discuss over coffee or drinks. Cheers, Alex.
Hi Bob. Ten years ago I was visiting Selinunte archeological area (Sicily). While I was strolling around I photographed a little symbol, partially hidden in the middle of other rocks, left without any description or comment for visitors. You can see it here https://www.instagram.com/p/CqneU4VteWH/?utm_source=ig_web_copy_link, Well, after what you've showed till now, it makes me think. Selinunte is a Greek colony dating about IV century BC.
There you go. Thanks for sharing.
I will be sharing PNGs and Photoshop files for people to investigate their image libraries in coming days.
I collected a few more symbolism layouts with your favored cone: https://www.pinterest.ca/stevenbhalls/exact-cone/
Thanks Steven. Very interesting.
I am not an expert on hieroglyphs or old egyptian but baphomet means something like
The living soul arrives in the pyramid.
Do you have a reference?
I found this article on toroidal multipoles very helpful to understanding the contributions of Zeldovich and Dubovik to traditional Maxwellian EM dynamics. As you mentioned in the broadcast Bob, there are many technological possibilities but these are just talking about info tech. The figures are really good, like figure 4, and section 5 explains the idea of anapoles. https://www.degruyter.com/document/doi/10.1515/nanoph-2017-0017/html
Thanks Simeon, I have skimmed it so far and can say that this is a nice launch point to read many of the materials we have been discussing these past years.
Although it is again, as you say, focussed on info-tech applications, I like figure 1(A) as it is the first one that I have seen that clearly shows poloidal currents excited at the surface of a sphere.
this is inline with our physical, macro observations.
https://youtu.be/AZ9RJr_s31w?t=1786
Also I like this
"A promising toroidal element in solid state systems is the skyrmion. It is the smallest possible perturbation to a uniform magnet, displaying as a localized solitonic magnetic whirls (spins) usually with a width of a few tens of atoms"
as it also aligns with macro observations...
https://youtube.com/live/r-9kGPs00i0
As you say, it succinctly connects the Toroidal moment and the Anapole, I have shown this diagram before (8(B)), but it is something that is critical to understanding how these systems can make a 'Macro Atom' / 'Macro Quantum Object".
And, how the Great Pyramid can present as one.
As I said at Assisi last year, the Anapole description is the same as an EVO.
https://youtu.be/AZ9RJr_s31w?t=1773
Thanks for the links, I've watched these videos several times before but it's all "clicking" now that I have a visual image in my mind of the anapole and what it does. So when the authors here talk about "metamolecules" or "macro atoms" as you mention above, is these reasonable descriptions of micro-ball lightning or EVOs? It's certainly easy to visualize that way.
Also, the Talebi et al. article seems to be making very similar points as the Lockheed Martin patent.
I have a question - for the main torus, are the two sub-toruses the only two, or are there more? The reason I ask is that I can see in ULTR, for example, that the two toruses form at the air/aluminium interface, but no such (obvious) interface exists in the pyramid, so why are there just two sub toruses? Is this due to the alignment of the pyramid (N-S) together with where EVOs are “fed into” the larger torus - or, is there an actual material interface in the stonework at the two places shown? Also, could sound (frequency) play a role in the sighting of the two subtoruses? Where there is a discontinuity, I get why they would form, but not in otherwise undifferentiated stonework.
The minimum is 2 You can see this on the Tungsten Chop Shop.
https://www.youtube.com/watch?v=lvtzxt9Duz4
It may be more. In ULTR we see two (Yin Yang) on n and at least 2 on n-1 when there is 'bar spiral galaxy' structure formed. This may be because of surface.
In the Pyramid I believe only the Two on the n-1 'Breaker side is needed' as the n dissociation leads to hydrogen and then the full ionisation of H2 leads to EVOs/Aetheric matter and that is sent trough the other side that then start a torsion mirror vortex on the 'S' side, which, in the Tungsten Chop shop is what STARTS (IMHO) the second Ball Lightning to form that causes the chop.
Thanks Bob - what I am really wondering about is how "the two" "know" to appear so as to cross both the galleries (I believe your observation that there are two) and the kings chamber - if they were 90 degrees further round, they would miss both.
Now, I am thinking this could be because the first appears where it does (between the galleries) precisely because of the Hydrogen that makes the EVOs and Aetheric matter (that is, matter on a finer scale in the fractal universe than nucleons) being introduced there. That is the "black hole" torus.
It appears that the black hole leads to the creation of a "white hole" 180 degrees round the major (virtual) torus formed by the moment eminating from the black hole (moments like to produce both an encompasing larger "field" torus around the torus that spawns them - and a further reaching column that also arcs around - resembling an apple with a stalk (the bagel, in other words, creates a ghostly apple or mandarin-like shroud around itself with a stalk surrounding what I believe is the worm hole - nature likes to make use of a good pattern!). This worm hole, however, doesn't like to "go straight" but likewise likes to arc to a point, 180 degree around, where, in the right conditions (like a discontinuity, perhaps), it opens out to form the white hole - which likewise forms a ghostly apple and stalk, only this time with the stalk being empty (the stalk actually being induced by the stalk from the black hole. And the result, thanks to geometry, is that the white hole stalk goes on to complete the circle back into the black hole.
Of course, where the white hole does not appear, the black hole stalk simply circles round back to the black hole, which could well lead to a runaway effect that quickly sees the black hole consume itself.
At least, that is how I imagine the large torus being induced by the smaller torus. Equally, with enough toruses, you should get black hole/white hole/black hole/white hole.... creating a virtuous circle that dampens down any runaway effect (with an even number of segments). Take this to two tier, and the smallest tier works as above, while the larger tier sees an increase in flux flow (through the joined up "stalks" / worm holes) that strengthens its own stalk (worm hole), apparently more exponentially than linearly. Take that to a third tier and the (partly?) exponential increase in flux flow through the worm hole eminating from the third tier torus and the whole becomes capable of "eating" and cohering large numbers of nucleons through the third tier worm hole (stalk).
At least, that is how I see things working - with the natural tendency of these worm holes to curve round a virtual axis (the Christ Centre) kicking the whole thing off from one torus, with discontinuities or some other mechanism - perhaps worm hole kinks? (given what we have seen to date, these worm holes are likely spiral in form) . Having said all that, it would appear that the first torus can be induced by a swirling vortex / vorticle of sufficient force, either at as a continuation of the vortex/vorticle at its centre or at 90 degrees to it.
So, given all this, with the first torus created, a (spiralling) worm hole (stalk) that loops back on the torus it eminated from is created, with, it looks like, a white hole appearing 180 degrees round, then every 90 degrees (when it forms black-white-black-white and loop), then every 45 and so on. If this is the case, only one point is needed to create the initial torus, with the radius of the resulting loop-back "worm hole" being dependent on the strength of the torus and the external pressure on the volume (so, relax external pressure, the worm hole radius increases, increase the pressure and the radius increases), the external pressure in this case being provided by both the electric and magnetic forces acting on the underlying aether ... which strongly suggests the existence of the aether (as deeper iterations of the fractal universe) rather than the rubber sheet of spacetime (yuck!)
As to how to increase from 2 to 4 to 6 to 8 segments (and so on), this is likely achieved by crossing vortices (as in the work of Winston Bostick)
Anyway, hope these musings help...
This is in line my understanding however, in part I think EM/Cardinal points and/or sound waves in the GP, due to its pyramid structure, help set up the resonant positions for 'O' - that is to say, there is already an Aether vortex there. We can see that EM waves interact with the pyramid in a distinct way from the Russian paper and I have every reason to expect sound would too.
Further, and in line with your musings, I think the lower breaker on the N side is doing most of the work and the product of that is fed into the resonant positions where Aetheric matter can aggregate.
I also think that Hydrogen can reach the upper gallery most likely through the rocks - I believe there would have been/is still the granite there.
So what is sent to the pure Aether vortex (possibly torsion field) side is more Aether increasing its density and possibly screened matter in EVOs.
I have not done the plan view, but will. It is offset. The centre line of the Great Gallery and the newly found gallery above is 7m to the East. The opposite Aether vortex is likely to the west and is constant with the location of the 'Kings' chamber. This is also in line with the offset nature in ionic freeze, section of YY in ULTR and Teslas Flower pot. There is an offset in the n-2 tor of an auspicious symbol when views from the top. The arrangement for two is like my cover slide for "Seek<&>Share" here with the ancient "sun worshipping symbols"
https://youtu.be/hWT9H8TPJeQ
with the offset like in the Egyptian seal I took a photo of. Except in both of these cases, 4 n-1 tors make the n tor.
Just had one more thought - the e-m "stalk" creating the larger torus, when the larger torus forms, likely then induces a counter torus to form a two-way braided flow pair -either that, or two stalks form in opposite directions, so the apple has two stalks, top and bottom.
Initially full rotating around each other every 180 degrees, as their energy increases, the number of twists increases, as they rotate around each other every 180 degrees, then every 90 degrees, then every 45 degrees, and so on, like an elastic band being wound - and that is how and why the toruses organize as they do - at the crossover points in the braid of counter-circling (e-m) filaments.
If this is the case, this explains how a torus can increase in energy without increasing in size (for, it is the number of twists that increase with, it would appear, a practical limit of somewhere around 52).
Now, I seem to remember, 52 is encoded somewhere in some measurement in the great pyramid, meaning the angle between each torus round the greater torus is somewhere around 2.25 x pi.
52 is also somewhat similar to the face angles of 51 degrees 50 minutes 40 seconds and, as you can't have 51.8444 toruses (fixed typo!), 50 or 52 are the closest values (assuming odd numbers just don't occur).
Also, (10 x pi / golden ratio) is approximately 50.83204 - divide 360 by (10 x pi / golden ratio) and you get 2.25 x pi as the inner angle for each arc - moving beyond that seems not to be possible, at least not in nature.
So, did the builder of the Great Pyramid know "a thing or two"? You bet!
“Great Pyramid rises at an angle of 51.5 degrees”
Wikipedia had an angle of 51.84º
51° 50' 40"
= 51° + 50'/60 + 40"/3600
= 51.844444°
Yes... it is no accident.
As mentioned in the chat here is the link to the folder with the O structure uploaded in multiple filetypes, 3D and 2D. Autocad, Illustrator, SVG, STP, OBJ, Sketchup even lightwave (v6)
Link to folder
https://drive.google.com/drive/folders/1PNWf0tAJR_O9XQRAgnCeBBokKZ9dxKBd?usp=share_link
If you need a more exotic filetype you can always download the 3DM (Rhino) file and export to any filetype you want from Rhino 3D. https://www.rhino3d.com/download/ free trial for 3 months. I'm not affiliated with mc neel and Rhino 3D, but it's a very handy piece of software with huge capabilities ;)
Thanks Rob.
I fixed the AI, made a PNG with expanded lines and will make a Photoshop example with some of the key layers for people to use
I also created a clean LW file with n-tor, n-1 tor and n-2 tor and will share that.
I think I will make a separate blog for these resources alongside yours and a chat so people can upload any images they produce.
I'm finally studying the Great Work, thanks to Bob Greenyer's freely shared Hermetical Magistery,
https://ia800501.us.archive.org/6/items/hermeticaltriump00limo/hermeticaltriump00limo.pdf
"Hidden away from the Metal mines is the august Stone, HERMES"
Thanks for the link
What a show, today for me it was Bob. Now I want to subscribe but this system is not secure. Anyway I can paid another way , mate.
Thanks!
Having established that the dimensions of the Great Pyramid on the Giza plateau were needed for science, not just for a tall royal vanity object, we must consider what applied science needed the Great Pyramid to be 8-sided rather than 4-sided, while the neighboring two were happily 4-sided.
We must not forget the other pyramids of various sizes and shapes up and down the ancient Nile river bed for dozens of miles.
The bent pyramid was likely precisely bent for science.
All the pyramids, big and smaller, have elaborate precisely constructed underground structures.
One pyramid appears to have been violently exploded above ground level, exposing huge underground chambers, mostly intact.
Many of these Nile pyramids have obviously been meticulously repaired and refurbished. For vain-glorious beauty's sake, or still, always, for science sake?
Bob, as you rightly insisted, we shouldn't whimsically change terminology invented by pioneers of science, and which are already widely used for convenience of reference, and to honor the discoverer.
However, I suggest that Ken Shoulder's original term EV, Electrum Validum, meaning Strong Electron, is more apt than his less happily coined EVOs, Exotic Vacuum Objects.
These dynamic fractal objects pervade the universe on all scales, they drive many, and interact with all, natural physical processes: there is nothing properly "exotic" about them.
Let's say he got it more right the first time, when he called the phenomenon EV, Electrum Validum.
Just plain BL, Ball Lightning, is beautifully evocative too, for objects that are not exotic, and not found only in a vacuum.
I'm late to the party, but... I want to try to do a ULTR experiment at home. Where is it suitable to ask questions re what equipment to use?
Here is another article from 2012 about "Rayleigh-Taylor Instability" and kinks that I think explains partly why strange radiation will start rotating because of the fluid dynamics:
https://scitechdaily.com/researchers-view-connection-between-kink-instability-and-rayleigh-taylor-instability/?utm_content=cmp-true
"Rayleigh–Taylor instability" is this the main stream science name of strange radiation birdies?
Sure look like it...
https://www.google.com/url?sa=i&url=https%3A%2F%2Fwww.researchgate.net%2Ffigure%2FRayleigh-Taylor-instability-t-1-95-density-contours-from-085-blue-to-225-red_fig4_333366706&psig=AOvVaw2Ro3L1CdDgWc4Z542WWrnY&ust=1680946947862000&source=images&cd=vfe&ved=0CBEQjRxqFwoTCPjI-L-9l_4CFQAAAAAdAAAAABAH
Wanted to inform you about what "main stream science" is up to:
https://phys.org/news/2023-04-laboratory-solar-flares-reveal-clues.html
...
"Among the recent discoveries are that solar corona loops do not appear to be a single structure, but rather are composed of fractally braided strands akin to a large rope."
...
"The loop develops a kink—a corkscrew-shaped instability—and individual strands start to break. "
...
What fun they have, maybe they should watch you videos instead :-)