ULTR - Ball Lightning and Coherent Nuclear Transmutation - P1
Electro-Nuclear Collapse / Electro-Nuclear Regeneration
Evidence is pointing to a common and physically observable mechanism in nuclear transmutation in a wide range of systems operating at different temperatures.
This presentation will go over new or unpublished data for the first time and discuss the implications.
Live stream recorded 21:30 CET 16 April 2021
At 2h 17m 43s, Matsumoto’s short paper on “Discovery of a New Kind of Electrical Current” is discussed. You can download it from here. It is just one page, but it says everything important. There is no extra detail in the 1996 proceedings of ICCF-6.
Analysis of magnetic particles recovered from ULTR experiment by MFMP volunteer Alan Goldwater
Alan ran a piece of 18 um thick Al kitchen foil in his (appropriately named) Magicsound Lab for 16 minutes in a Vivreal 43kHz ultrasonic cleaner. Some apparently magnetic fragments were recovered that were not able to be seen easily with the naked eye. Some of them were found to be iron rich spheres with a crenelated structure (click here for Alan’s report pdf). They contained no Cr or Ni so were very unlikely to have come from the stainless steel of the ultrasonic cleaner.
Another possibility is that they somehow come as inclusions in the kitchen foil from some part of its manufacturing process - this needs to be discounted. That being said, the structures were predicted to be produced in the experiment based on historical observation in NOVA, LION, me356, experiments, as well as in Italian studies of Ball Lighting in Norway.
Other fragment with similar composition
Alan Goldwater observed another fragment in the collected magnetic parts that appeared to have a similar elemental make-up, however, it was not a sphere.
Hey Bob, Great presentation as always! I really loved the song. Looking forward to a high quality version some day so I can recommend it be played as part of the freedom music rotation on an alternative internet radio station I listen too (media monarchy for those who might be interested). I haven't had an opportunity to repeat my ultra experiments yet as my daughter has a cold and hasn't been out of the house for the last week and a bit. Hopefully they'll be a chance next week, I have my camera and microscope stuff ready.
Related to the comment about planetary destruction you made. I often felt based on various readings that nuclear weapons being co developed in two locations was not an coincidence, and done precisely for the purpose of providing a fail safe redundant self destruct deterrent to potential off world influences. I now find it curious that the worlds super powers are all racing to build larger and larger particle accelerators. I realize it's rather a leap, but I've suspected for a long time, there may be an argument to be made that a super conducting torus might be an oppropriate geometry for some kind of torsion weapon, perhaps even the next generation fail safe redundant self destructive weapon (as you alluded this type of technology would be capable of in your presentation).
I sometimes try to see it from the perspective of our unfortunate rulers, and wonder are they so foolish and drunk with superiority as to believe that a termination switch for the entire planet is really a necessity for humanity as a collective to retain it's sovereignty in the cosmos. It's good to be cautious I guess, but it feels like humanities fear is continually leveraged against us to put us in terrible situations. I really hope this technology and with it a grander vision of the cosmos might lesson humanities fear and bring us back from the precipice which we always seem to foolishly border on.
All the best, looking forward to o day presentations, and perhaps in the next few months I will have my own space (not the family kitchen) to do experiments in!
I was able to follow the live stream sparsely but got lucky to be just on when the SEMs / EDX of Alan's foils where being shown by you. As always, and thinking on the skeptic criticisism, in the conditions the experiment is being conducted, is impossible to rule out contamination either from the material (Al foil) itself or the reaction vessel. A way to isolate from the influence of the vessel material itself would be to use a Polipropilene (PP) container inmersed in the ultrasound bath, I recall that the waves will be present anyway as the PP will transmit them, might be some attenuation / distorsion, but should work anyway. I plan to do this in my experiments with reference solutions, to discard iron coming from the basin itself.
Now, Isolating from contaminants in the material is always more complex, and in solid samples, practically impossible to remove the doubt completely, at least for skeptical's sake. The work around it would be to have a control experiment with the same material but I can hardly think of another process that would produce the same mechanical shredding effect. In my case, as I am working with solutions, is easier as one can have a reference experiment with non cavitating mechanic stirring and the same energy input that should not show any transmutation. The only other workaround is to work with certified purity materials, or even with purity patrons, which is always expensive, but might be worth a try, tho.